
Part P Non-Compliance: What To Do
- How urgent
- Caution
- Who fixes it
- An electrician
What's happening?
Part P sets electrical-safety requirements for work in dwellings in England. Notifiable work includes a new circuit, replacement of a consumer unit, and additions or alterations within the defined zones of a room containing a bath or shower or around a swimming pool or sauna heater. A registered competent person can self-certify notifiable work; otherwise it must follow the Building Control route.
Book an electrician
What usually causes it?
- Electrician who was not registered with a competent person scheme carried out notifiable work without notifying Building Control
- DIY electrical work on notifiable circuits without Building Control involvement
- Electrical additions or alterations within a defined bathroom special-location zone completed without the required notification
- Consumer unit replacement done without Part P notification
- A new outdoor circuit installed without the required notification
Is it dangerous?
Non-compliance with Part P does not necessarily mean the work is unsafe, but it does mean the work has not been independently verified. The danger depends on the quality of the work done. Improperly installed circuits can have inadequate protection, incorrect cable sizing, or missing earthing: all of which are fire and shock risks.
Can I fix it myself?
A competent-person installer cannot retrospectively self-certify work they did not carry out. Ask a competent electrician to inspect and test its safety, and ask the local authority what evidence or regularisation process it requires for missing Building Regulations notification.
When should you call an electrician?
Ask a competent electrician to inspect and test the work and identify any remedial action. Electrical test evidence does not itself replace a missing Building Regulations notification, so contact the local authority separately about regularisation.
What will the electrician actually do?
- Inspect and test the non-compliant electrical work against current standards
- Identify any defects or areas that do not meet BS 7671 requirements
- Carry out remedial work to bring the installation up to standard
- Issue the appropriate electrical certificates (EIC or MEIWC)
- Notify any new remedial work when its scope is notifiable
- Provide you with formal certification for your records
Who fixes this
What it usually costs
- EICR Cost
- £100–£330
Questions people ask
What electrical work is notifiable in England?
What happens if I sell a house with non-notified work?
Can I get a regularisation certificate from the council?
Will I be fined for non-compliant electrical work?
Sources & References
Before you book, read how to check an electrician is qualified.
What would yours cost?
We'll tell you the price for this, then find a local electrician to do it.
Get my instant quote